KESO KEK i-handle S
KESO AG
Subject to change without notice
Page 23 from 34 pages
10
Emergency power / emergency opening
10.1
Electronic
Emergency power will only work in connection with the KESO KEK Programmer PPG V2 and the
KAPI Bus interface at the reader module in the external shield.
Important note:
You must insert/place an authorized KESO medium in/on the KESO KEK Programmer
PPG V2.
1.)
Plug the KAPI Bus cable into the interface on the reader module at the external shield
2.)
Connect the KAPI Bus cable to the KESO KEK Programmer PPG V2
3.)
Place/insert an authorised KEK medium into/on the KESO KEK Programmer PPG V2
4.)
Execute emergency opening
10.2
Mechanical
Mechanical emergency opening from the outside can only be performed in connection with a
cylinder and a replacement lock. Mechanical emergency opening is not supported for shield
without cylinder (blind).
2.) KAPI
Interface
3.) Place/insert
authorised Key
4.)
Execute
emergency
openingausführen
