Assa Abloy Corbin Russwin Access 700 ED5000N Series, Руководство по установке

Страница: 6 / 28

6
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
Cylinder Collar Chart
Cylinder Length Collar
Inches Millimeters
1-1/8" 29mm None
1-1/4" 32mm 422F88*
1-1/2" 38mm 686F98*
*Specify Finish Fig. 3a
Escutcheon Assembly
3. Trim Assembly Instructions:
a. Check cylinder components:
Cylinders longer than 1-1/8" (29mm) require collars.
Refer to Cylinder Collar Chart (Fig. 3a).
(for Mortise, skip to Step 5)
b. If required, modify by cutting cylinder tailpiece:
Correct length is 1/16" to 3/16" (2 to 5mm)
beyond cylinder housing cam.
c. Assemble cylinder:
1. Insert cylinder housing prongs into matching notches of escutcheon.
2. Pass cylinder tailpiece through cylinder collar (if required) and slot in cylinder cam.
3. Fasten cylinder in escutcheon recess or collar using 2 mounting screws.
Do not overtighten screws.
d. Escutcheon Assembly (Fig. 3b):
The lever is handed (LHR shown).
Note : Lever Return Spring handing can be identified by the color of the spring:
• LHR: Part Number 651F618 (Red)
• RHR: Part Number 651F628 (Blue)
5) Rim Exit Installation Instructions (Continued)
Fig. 3b
Rim Cylinder
Cam must be postitioned as shown
when cylinder tailpiece is assembled
Cylinder Collar (if required)
Cylinder Housing
Cam