Assa Abloy Corbin Russwin Access 700 ED5000N Series, Руководство по установке

Страница: 15 / 28

15
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
8) PIP (PoE) Wiring & Installation (Continued)
Molex-F Molex-F Molex-M
Cable
: CAT 5e,
26 AWG stranded,
100ohm
RJ45-M
Molex-M
Cable
: CA
T 5e or higher
24 A
WG 100ohm
B-Splice
Crimp Connector
PoE
Lock
Ceiling
Supplied by CI
Ground
Ring Terminal
Secured to Lock
Mounting Plate
Frame-Side
Harness
Assembly
(15' length)
24AWG
Stranded
Drain
Wire for
Earth
Ground in
15' Frame
Harness
Cable drain wire
concealed in
shrink tubing
Patch Panel
Cable: CAT 5e or higher
24 AWG
RJ45-F Jack
Approved Software
Certified Integrator (CI) supplies and terminates
the B-Splice connector and the
male RJ45 connector from harness to
end user provided facility cable
Supplied by End User
PoE Switch
PoE Switch is
Terminated to
Earth Ground
Patch Cable
Patch Panel to
PoE Switch
Wiring to TIA/EIA 568-B Standard
A
Notes:
• Connectors go on only one
way. They cannot be placed
in an incorrect position.
• Do not force and do not
offset connectors
• Be sure they are completely
seated (flush)
• PoE power source cannot be
connected to a receptacle
controlled by a switch
B
C
D
To building or electrical ground
RJ45-M
NOTE: TIA/EIA 568-B added
only at lock side