Assa Abloy Corbin Russwin Access 700 ED5000N Series, Руководство по установке

Страница: 11 / 28

11
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
a. Make sure tailpiece is oriented vertically.
b. Feed trim wire harness through wire harness hole (Fig. 3a).
c. Mount trim assembly to door pulling slack wire towards device side of door.
Note: Be careful not to pinch wire harness.
d. When mounting trim, lift tailpiece to pass through hole on device side (Fig. 3b).
Note: Ensure tailpiece is still oriented vertically.
e. Fasten trim assembly to door using (2) 1/4-20 oval head screws and (2) finish washers (Fig. 3b).
Note: Finger tighten only.
Tighten
securely
4. Install Exit Device:
6) Mortise Exit Installation Instructions (Continued)
Fig. 4a
Fig. 4b
a. Seat device against door being careful to align vertical trim tailpiece to engage with
cross hole of device cam -
see Figure 4a.
b. Fasten device to trim assembly using (2) 1/4-20 pan head screws (Fig. 4a).
c. Follow instructions packed with device to secure device to door.
d. Tighten all (4) screws (Fig. 4b).