Assa Abloy ANYKEY, Руководство по эксплуатации

Страница: 33 / 60

Introduction
D00422
02
Seite 33
1 Introduction
1.1 Security from the very first minute!
It is essential that you program the Master Card, so that the fitting cannot be opened with any card (see the
section on Master card Programming).
1.2 I n te n d e d u se
Q
The security fitting with integrated access control is a battery-operated access control system.
Q
It has been integrated as a stand-alone device in a fitting system.
Q
The identification is determined via Code-Cards
Q
An opening of the door from the outside is only possible for authorised users.
Q
The door can be opened from the inside at all times and by all users.
Q
Other applications are not permitted.
Q
Unauthorised changes or modifications, which have not been described in these operating instructions, are
not permitted.
1.2.1 Foreseeable incorrect usages
Always make sure that the door can be closed. Do not use any wedges, doorstops or other accessories, which
prevent a closing and locking of the door.
1.3 The re ad oper ati on
Notice
The sensor element (1) in the card reader is located above the external door handle.
A contactless card reader is integrated into the security fitting. The card
reader is highly energy-efficient. This results in a long battery life. In
standby operations the card reader enters "sleep mode". You can wake
the card reader by moving the card rapidly in the direction of the reader
field. The reading procedure is accelerated by holding your finger
simultaneously between the card and the card reader.
Move the card rapidly in the direction of the card reader. It is best to hold
your finger between the card and card reader during this process. Hold
the card in this position until you hear an acoustic signal and/or the
indicators flash.