LongReach scanner
1
The LongReach scanner
ASP's LongReach scanner is a compact high-performance hand-held
CCD barcode scanner suitable for reading barcodes from 5cm to 20cm
away.
The LongReach scanner has a yellow
push button switch positioned right
where your index finger comfortably sits
when the scanner is held in your hand.
To read a barcode, simply press the
button and point the scanner's red beam
at the barcode. The scanner will
automatically read the barcode, output
the data, and beep to signal a successful
read.
The LongReach scanner has been
pre-programmed to read most barcode
types you are likely to encounter. For
special requirements, please contact ASP or your dealer.
If you are having trouble reading barcode labels, the most common
causes are likely to be:
•
Trying to read a barcode that is too long for the scanner,
•
Trying to read a barcode from too far away, or too close,
•
Not having the reading beam properly positioned over the barcode,
or
•
Having the reading beam covering more than one barcode.
Very poor quality or damaged barcode labels may also present scanning
problems, but it may be possible to read them by moving the scanner’s
reading beam up and down the label in the direction of the bars, to find
an undamaged path across the barcode symbol.
