11
3.6
Using the Network Camera for the first time
The Network Camera is a network device and its use should be straightforward for those who have basic
networking knowledge. Making the initial steps for setting up the network camera will be based on a simple
network connection.
Option 1
Connect the network camera to a HUB / Switch which is connected to a PC
Option 2
Connect the network camera directly to a PC with a crossover cable.
After the network camera has its activity lights on, use the PC for setting up the IP Address of the Network
camera. Refer to the section of “
Accessing the Network Camera”
at the next page for detailed instructions.
Hints: Possible Network Configurations in your network infrastructure
1. Configuration 1
Internet Access: ADSL or Cable Modem
IP address: One real IP or one dynamic IP
Connection Type: Only the Network Camera connects to the internet
For fixed real IP, set up the IP into the Network camera. For dynamic IP, start PPPoE.
2. Configuration 2
Internet Access: ADSL or Cable Modem
IP address: More than one real IP or one dynamic IP
Connection Type: The Network Camera and PC connect to the internet
Device needed: Switch Hub
For fixed real IP, set up the IP into the Network camera and PC. For dynamic IP, start
PPPoE.
3. Configuration 3
Internet Access: ADSL or Cable Modem
IP address: one real IP or one dynamic IP
Connection Type: The Network Camera and PC connect to the internet
Device needed: IP sharing such as Hub / Switch and a Router
Use virtual IP, set up port forwarding in IP sharing.
(Suggestion: Refer to your Network Administrator if necessary for more information)
