48
6
Troubleshooting
6.1
Factory Default
To execute the Factory Default, there are two options:
1.
Delete the cover and then press the factory default button on the top layer of the module
boards.
2. Use a wire to insert one end into “Default” and one of the “GND” pin (which are the Pin 5 and Pin 6).
The device is back to factory default. All settings will be erased from the device, and the assigned IP will be
back to 192.168.1.200 and Subnet mask to 255.255.0.0.
6.2
Viewing the camera from a remote location
The below guideline shows you how to setup the Network Camera for viewing it from a remote location.
The network infrastructure demonstration is just for your reference only. Each network infrastructure may vary
upon the needs of the organization.
Note:
Consult your Network Administrator for a better understanding of networking concepts and related topics.
Factory Default Button
