The main thing is to ensure you adequately lubricate the shaft seals at the end of the shaft where the
bowl attaches and the ring behind the bowl and this should take around 10 mins - this is essential to
maintain the unit and ensure trouble free use and that no leaks occur.
the bowl lifts up and moves forward to come and you remove the rear white seal and lube behind it
reassemble...
Lube rear of bowl where it meets ring at rear to assist re assembly.....white auger can be removed from
cylinder for cleaning...lube the spindle and seal where the auger meets the cylinder.
To reattach simply place back over silver cylinder and turn gently until you feel the spring move into
place and then reattach bowl and ensure it snugly clips back down into place and rear seal does not get
pinched during reattachment.
Troubleshooting
stretched/pinched rear seal
Check all switches are up & on – auger needs to be turning and freeze switch needs to be
loosen 2 screws on cover each side with a Philips screwdriver to allow arm to move and
turn unit back on, you should hear a click when freezing mechanism comes into play.
If unit will not dispense please check outlet hole near tap and dislodge any ice gently by
inserting the end of a plastic straw up through the nozzle to clear any obstruction.
Leaking
Not
freezing up
Thankyou...
The main thing is to ensure you adequately lubricate the shaft seals at the end of the shaft where the
bowl attaches and the ring behind the bowl and this should take around 10 mins - this is essential to
maintain the unit and ensure trouble free use and that no leaks occur.
the bowl lifts up and moves forward to come and you remove the rear white seal and lube behind it
reassemble...
Lube rear of bowl where it meets ring at rear to assist re assembly.....white auger can be removed from
cylinder for cleaning...lube the spindle and seal where the auger meets the cylinder.
To reattach simply place back over silver cylinder and turn gently until you feel the spring move into
place and then reattach bowl and ensure it snugly clips back down into place and rear seal does not get
pinched during reattachment.
Troubleshooting
stretched/pinched rear seal
Check all switches are up & on – auger needs to be turning and freeze switch needs to be
loosen 2 screws on cover each side with a Philips screwdriver to allow arm to move and
turn unit back on, you should hear a click when freezing mechanism comes into play.
If unit will not dispense please check outlet hole near tap and dislodge any ice gently by
inserting the end of a plastic straw up through the nozzle to clear any obstruction.
Leaking
Not
freezing up
Thankyou...
should be directed to 044SLUSHGO or 0447587446 or [email protected]
