Sanitizing and Hygiene
-
fectant soap and dry with a paper towel.
the outside of the tube before handling it to lubricate machine parts.
regulations must also be checked.
Strictly follow the guidelines and recommendations for operation and cleaning
of your machine
The bowl lifts up and moves forward to come and you remove the rear white seal and lube behind it
-
semble...
Lube rear of bowl where it meets ring at rear to assist re assembly.....white auger can be removed from
cylinder for cleaning...lube the spindle and seal where the auger meets the cylinder.
To reattach simply place back over silver cylinder and turn gently until you
feel the spring move into place and then reattach bowl and ensure it snugly
clips back down into place and rear seal does not get pinched during
reattachment.
As far as maintaining the machine - you of course need to keep them clean
and cleaning them takes minutes - every hire you need to rinse the bowls
with the petroleum jelly lubricant and ensure you lubricate the shaft seals to
avoid wear and tear and leakage - all parts however are replaceable and we
have some very good people who can do it if ever necessary. Parts are not
expensive by any means.
You can use any Granita mix but we wholesale it for $59 a case plus freight
so we are very cheap for the concentrate (6 x 2 litre concentrate per case -
makes 60 litres 4:1 water)
Bacteria needs water to survive. Air-Dry all machine parts after cleaning and sanitizing
should be directed to 044SLUSHGO or 0447587446 or [email protected]
