manualshive.com logo in svg

ASM Polytouch HYDRASYNTH EXPLORER, Руководство пользователя, Страница: 4 / 86

Поделиться
Скачать
ASM Polytouch HYDRASYNTH EXPLORER Скачать руководство пользователя страница 4

4

iMpOrTanT SafeTy inSTrucTiOnS

Save your ears!

The product and its software, when used in combination with an amplifier, headphones or speakers, 

may be able to produce sound levels that could cause permanent hearing loss. DO NOT operate for 

long periods of time at a high level or at a level that is uncomfortable.
If you encounter any hearing loss or ringing in the ears, please consult an audiologist.

precautions include, but are not limited to, the following:

  1. Read and understand all the instructions.
  2. Always follow the instructions on the 

instrument.

  3. Before cleaning the device, always remove 

the USB and DC cable. When cleaning, use 

a soft and dry cloth. Do not use gasoline, 

alcohol, acetone, turpentine or any other 

organic solutions; do not use a liquid 

cleaner, spray or cloth that’s too wet.

  4. Do not use the device near water or 

moisture, such as a bathtub, sink, swimming 

pool or similar place.

  5. Do not place the device in an unstable 

position where it might accidentally fall 

over.

  6. Do not place heavy objects on the device. 

Do not block openings or vents of the 

device; these locations are used for air 

circulation to prevent the device from 

overheating. Do not place the device near 

a heat vent at any location with poor air 

circulation.

  7. Do not open or insert anything into the 

device that may cause a fire or electrical 

shock.

  8. Do not spill any kind of liquid onto the 

device.

  9. Always take the device to a qualified service 

center. You will invalidate your warranty 

if you open and remove the cover, and 

improper assembly may cause electrical 

shock or other malfunctions.

 10. Do not use the device with thunder and 

lightning present; it may cause electrical 

shock.

 11. Do not expose the device to hot sunlight.
 12. Do not use the device when there is a gas 

leak nearby.

 13. Refer to all manufacturers’ instructions 

regarding the proper installation, use, and 

disposal of batteries.

14. Ashun Sound Machines is not responsible 

for any damage or data loss caused by 

improper operation of the device.

Specifications Subject to change

The information contained in this manual is believed to be correct at the time of printing. However, 

Ashun Sound Machines reserves the right to change or modify any of the specifications without notice 

or obligation to update the hardware that has been purchased.

Before requesting Service...

Please study this manual carefully and consult your dealer before requesting service. Service charges 

incurred due to a lack of knowledge relating to how a function or feature works (when the product is 

operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owner’s 

responsibility. 

Содержание Polytouch HYDRASYNTH EXPLORER























































































Отзывы:

Нет отзывов