Asko W6984 FI, Руководство по эксплуатации

Страница: 4 / 36

Transport protection
Remove any transport protection devices before
installing the machine. See the "Transport protection"
chapter.
Packing material
Sort waste materials in accordance with local
guidelines.
Washer door
• The washer door will not open until the machine
is connected to the electricity supply.
• To open the door manually, see "The washer door
will not open" in the "Troubleshooting" chapter.
• The machine cannot be started when the door is
open.
• To open the washer door while a program is
running, see "Close the door and press the
Start/Stop button" in the "Washing" chapter.
Language selection
You will be prompted to select the display language
when you have connected your machine and start it
for the first time. Do as follows:
1. Press the up or down arrow button and choose
from: US English, English, Svenska, Dansk,
Norsk, Suomi, Français, Deutsch, Italiano,
Espanol, Русский, Nederlands.
2. Press the button in the middle of the program
selector or Start/Stop to save and to move on to
the clock and time display settings.
Time display options
The time is shown on the display.
1. Press the up or down arrow button to choose 12h,
24h, or display remaining time. Press the program
selector or Start/Stop to confirm.
Once you have made a selection, the menu for
setting the clock will open.
Set the clock
1. Press the up or down arrow button until the correct
hour figure is displayed. Press the program
selector to confirm.
2. Press the up or down arrow button until the correct
minute figure is displayed. Press the program
selector or Start/Stop to save.
Once you have made a selection, the program menu
will open.
Checking water hardness
The quantity of detergent needed depends, amongst
other things, on how hard the water is. See the
detergent pack for details. Phone your local water
company to check the water hardness in your area.
NOTE!
Each machine is tested before leaving the factory.
A small amount of water may remain in the drain
pump, though this does not affect quality or damage
the machine.
See Quick guide on the last page
4
Before using your machine for the first time