Asko W6984 FI, Руководство по эксплуатации

Страница: 30 / 36

The machine can also be connected to the drain via
a spigot connection. In this case the hose should
also be 600-900 mm above the floor. The internal
diameter of the hole should be at least 18 mm.
• Cut the nipple
• Remove burrs from the hole.
See the illustration.
At least 18 mm
Electrical installation
Connect the machine by plugging it into an earthed
wall socket. The electrical wall socket must be placed
outside of the installation area to be easily
accessible.
CAUTION!
If this appliance is supplied from a cord extensions
set or electrical portable outlet device, the cord
extension ser or electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
Connection on delivery
The machine is supplied as 1-Phase, 220-230 V,
50-60 Hz, heat output 2000 W and has a 10 A plug.
Any residual current devices must be type A.
NOTE!
Repairs and maintenance must be carried out by a
qualified professional.
30
Installation