Asko W6984 FI, Руководство по эксплуатации

Страница: 29 / 36

Positioning the washing machine
The washing machine can be installed as a built-in
or freestanding unit. Place the machine on a firm
surface with easy access to the plug.
A. Built-in
The washing machine can be installed under a
counter top with a working height of 850–900 mm.
Leave a 5 mm space around the entire machine,
including between the rear edge of the top cover and
the wall behind it.
B. Freestanding
The washing machine can be positioned beside or
under a tumble dryer.
Adjusting the feet
Keep the noise that the machine produces to a
minimum by adjusting the feet so that the machine
is steady and balanced on the floor. Tighten the lock
nuts.
Locking nut
Connection to water supply
Water connection should be carried out by an
appropriately qualified person. Connect the machine
using the accompanying supply hose. Water
pressure should be 0.1–1MPa (approx. 1–10kp/cm
2
; 10–100N/cm
2
). There should be a stopcock on the
water pipe.
If the pipes are newly installed, it may be wise to flush
them through so that any dirt is washed away.
Otherwise, dirt can clog the filter in the machine’s
water intake and cut off cut off or reduce water flow
to the machine. Check for leaks.
Use only the supply hose supplied with the machine.
Do not re-use old hoses or other loose supply hoses.
Drainage connection
The machine is supplied with a drainage hose
attached, which must be connected to a drain. See
the examples below. The height must be 600–900
mm above floor level.
The lower position (600 mm) is always preferable.
Ensure that the drainage hose has no kinks.
600--900 mm
29
Installation