7.
TV – Transfer
the Trinocular exit
r the TV transfer is only a TV-adapter and a
eeded.
ular exit. Furthermore the TV-camera
the camera in comparison to the im-
ge in the eyepiece there are six different TV-
7.1.
TV – Transfer over
Fo
TV with camera and a monitor adjustment are
n
The TV-adapter will be assembled directly on
the trinoc
(USB camera, CCD camera) has to be
mounted on the TV-adapter (in most cases c-
mount).
7.1.1. For the right adaptation of the image
detail of
a
adapter available with magnification factor
0,3x ; 0,4x ; 0,4x WF ; 0,63x ; 1x and 1,6x
(dovetail ring
∅
40/ c-mount).
Picture 28: TV – adapter
se you don’t have to
hange nothing. In case you don’t have a
lamped with two screws. The lower
art will be set directly on the trinocular exit,
All TV-adapter will be aligned factory-made at
the delivery. In normal ca
c
clear picture you have to follow the instructions
below:
The TV-adapter 1x comes in two parts which
will be c
p
the upper part will be set on the thread of the
camera (in most cases the thread comes as c-
mount). Both parts will be add together and
will be adjust against each other at a good
aligned microscope with smallest magnification
factor until there is a clear and sharpen picture
on the monitor. Now you have to align the
camera itself (left and right side of a picture)
and the screws will be tighten. You have to do
the same steps for the TV-adapter 0,3x ; 0,4x ;
0,4x WF; 0,63x and 1,6x (analogous in
comparison to the TV-adapter 1x)
Picture 29: SMT 4 with TV-adapter 0,63x and
USB camera
26
