45
Expand
Note:
● Either "H/V Keystone" , "Corner correction" or "Curved correction" setting value is valid. When
the "H/V Keystone" , "Corner correction" or "Curved correction" adjustment is finished, the
adjusted value will be reset when you adjust the other one.
● The "Curved Correction X Offset" and the "Curved Correction Y Offset" can not be adjusted
independently. After adjusting the "Curved Correction X/Y Gain" at the beginning, please adjust
the "Curved Correction X Offset" and "Curved Correction Y Offset".
● Press the KEYSTONE button or CORNER button or CURVED button on the remote control
when the "H/V Keystone" , "Corner correction" or "Curved correction" screen is displaying, it will
switch to the other adjustment screen.
● Correcting up to ±15° for the tilt in the vertical direction and ±15° for the tilt in the horizontal
direction are available for adjustments with "Keystone". However, the image quality will degrade
and it will get harder to focus with more correction. Install the projector so that the correction will
be as small as possible.
● Screen size will also change when "H/V Keystone" is used to perform various adjustments.
● Aspect ratio of the image size may shift depending on the correction.
Curved correction
Adjust when the linearity is not uniform or the vertical and horizontal lines are distorted.
Press▲▼◄►to adjust the item.
Reset value
Return the corrected values to the factory default values.
Press▲▼to select "Reset value", then press the OK button, the state of the keystone correction is
released.
Items
Operation
Adjustment
Adjustment range
Barrel
correction X/Y
Gain
Press the►button Adjust the right of
the width
-40 ~ +40
Press the◄button Adjust the left of
the width
Press the▲button Adjust the top of
the width
-40 ~ +40
Press the▼button Adjust the bottom
of the width
Barrel
correction X
Offset
Press the►button Adjust the right of
the distortion
0 ~ +1365
Press the◄button Adjust the left of
the distortion
Barrel
Correction Y
Offset
Press the▲button Adjust the top of
the distortion
0 ~ +799
Press the▼button Adjust the bottom
of the distortion
Downloaded From projector-manual.com ASK Manuals
