39
Setting
Enable to control the fan through the Setting
menu.
You can select the running speed of the fan
according to the altitude of the location where
the projector is installed.
Off ...... Normal speed. Set it so if the projector
is operated at a lower altitude.
On ...... Faster than Off. Set it so if the projector
is operated at a higher altitude because
fans will produce weaker effects.
Note:
Plese set High land "On" when operating the
projector higher than 2000 meters.
Change the brightness of the screen.
Normal ... Normal brightness.
Eco .......... Lower brightness, reducing
power consumption and
extending the lamp life.
This function provides the following options in
the cooling fans’ operation after turning off the
projector.
Normal... Normal cooling speed.
60 sec ... Faster and lounder than Normal,
cooling time is shorter.
0 sec ..... Enable you directly unplug the AC
power cord after turning off the
projector, no need waiting for cooling.
Note:
When it is set to "0 sec", you cannot restart the projector immediately after the power-off. The
lamp remains high temperature and needs to be cooled, so it sometimes takes longer time than
usual for the lamp to light up again.
High land
Lamp control
Cooling fast
ENTER
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Memory
Viewer
On start Off
Standby mode Normal
High land
Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris Off
Terminal Computer 2
Sound
HDMI setup
ENTER
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Memory
Viewer
On start Off
Standby mode Normal
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris Off
Terminal Computer 2
Sound
HDMI setup
ENTER
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Memory
Viewer
On start Off
Standby mode Normal
High land Off
Lamp control
Cooling fast
Normal
Closed caption Off
Key lock
Iris Off
Terminal Computer 2
Sound
HDMI setup
High land
Lamp control
Cooling fast
Downloaded From projector-manual.com ASK Manuals
