54
Infomation
The information menu is used to detect signal of projected image and running state.
Menu operation
Press MENU button on remote control or side
control to display the screen menu. Press
to select Info., then press OK button,
the information menu will appear as the right
picture.
The information below will display in
information menu.
info. menu
ENTER
Display
Color adjust
Setting
Expand
Info.
Move
----
Exit
Memory
Viewer
Input Computer 1
----
H-sync freq. --- KHz
V-sync freq. --- Hz
Lamp status
Lamp counter 9 H
Power management Off
5 Min
Image mode Dynamic
S/N ×××××
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz or - - - -KHz when no signal is
detected.
V-sync freq .
The vertical frequency of the input signal is
displayed in Hz or - - - - Hz when no signal is
detected.
Lamp status
The setting status of "Lamp control" is
displayed.
Lamp counter
The usage time of the lamp is displayed.
Power management
The setting status of "Power management" is
displayed.
Image mode
The setting status of "Image mode" is
displayed.
S/N
The serial number of the projector is displayed.
The serial number is used to service the
projector.
Downloaded From projector-manual.com ASK Manuals
