48
Expand
Note:
Factory default: "Timer: 5 min",
"Ready countdown: 0 min".
Power management
ENTER
Display
Color adjust
Setting
Expand
Info.
Move
Next
Back
Memory
Viewer
Ready
Shut down
Off
Timer 5 Min
Ready countdown 0 Min
Power management
Power management
No signal
01 : 20
Time left before Lamp is off.
For reducing power consumption as well as maintaining the lamp life, the Power management
function turns off the projection lamp when the projector is not operated for a certain period. Select
one of the following options:
Ready .................. When the lamp has been fully cooled down, the POWER indicator changes to
green blinking. In this condition, the projection lamp will be turned on if the input
signal is reconnected or any button on the side control or remote control is
pressed.
Shut down ........... When the lamp has been fully cooled down, the power will be turned off.
Off ....................... Power management function is off.
Timer ................... If the input signal is interrupted and no button is pressed for more than 30
seconds, the timer display with No signal appears. It starts the countdown until
the lamp is turned off. Press
button to set the Timer(1~30min.)
Ready countdown..Set the time that ready status transfers to standby status automatically.(0-
30min. 0 Min: not transfer automatically)
In ready status, press POWER button to swicth to standby status, and press
any other button to turn on the projector.
Power management
Downloaded From projector-manual.com ASK Manuals
