manualshive.com logo in svg

ashtech DG14, Справочное руководство

Ashtech DG14 - это передовой геодезический прибор с высокой точностью и мощными функциями. Вы можете скачать бесплатно Руководство по эксплуатации с нашего сайта для полного понимания возможностей этого прибора. Посетите manualshive.com, чтобы получить доступ к руководству.

Поделиться
Скачать
background image

ix

ALM: Almanac Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  228
CRT: Cartesian Coordinates Message . . . . . . . . . . . . . . . . . . . . . . . .  229
GDC: Grid Coordinates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  231
GGA: 3-D GPS Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  233
GLL: 2-D Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  236
GNS: GNSS Fix Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  238
GRS: Satellite Range Residuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  239
GSA: DOP and Active Satellites . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  241
GSN: Satellite PRN Number and Signal Strength  . . . . . . . . . . . . . . .  243
GST: Pseudo-Range Error Statistics  . . . . . . . . . . . . . . . . . . . . . . . . .  245
GSV: Satellites in View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  247
GXP: Horizontal Position Message. . . . . . . . . . . . . . . . . . . . . . . . . . .  250
LTN: Position Output Latency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  251
MSG: Differential Base Station Data. . . . . . . . . . . . . . . . . . . . . . . . . .  253
PER: Global Output Interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  264
POS: Position Message  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  265
PTT: Pulse Time Tag  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  267
RMC: Recommended Minimum Course . . . . . . . . . . . . . . . . . . . . . . .  268
RRE: Satellite Range Residuals and Position Error . . . . . . . . . . . . . .  270
SAT: Comprehensive Satellite Tracking Data. . . . . . . . . . . . . . . . . . .  272
TCM: Differential Remote Station Status  . . . . . . . . . . . . . . . . . . . . . .  275
TTT: Photogrammetry Event Marker  . . . . . . . . . . . . . . . . . . . . . . . . .  277
UKO: UKOOA Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  278
UTM: Universal Transverse Mercator (UTM) Coordinates . . . . . . . . .  279
VTG: Course and Speed Over the Ground. . . . . . . . . . . . . . . . . . . . .  282
XMG: Exception Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  284
ZDA: Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  285

Chapter 9.

Differential Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  287

RTCM Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

AUT: Automatic Differential Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . .  289
BAS: Set Receiver in Differential Base Station Mode. . . . . . . . . . . . .  290
FMT: Differential Output Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  290
IOD: Ephemeris Data Update Rate for RTCM Base Station. . . . . . . .  290
MAX: Maximum Age Threshold for Differential Corrections . . . . . . . .  291
MSG: Define RTCM Type 16 Message  . . . . . . . . . . . . . . . . . . . . . . .  291
OFF: Disable Differential Operation . . . . . . . . . . . . . . . . . . . . . . . . . .  292
QAF: Quality Factor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  292
REM: Set Receiver in Differential Remote Station Mode . . . . . . . . . .  293
RPS: Rover Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  293
RTC: Query RTCM Operating Parameters and Status. . . . . . . . . . . .  294
RTL: User Entered Position Information . . . . . . . . . . . . . . . . . . . . . . .  297
SEQ: Verify RTCM Message Sequence . . . . . . . . . . . . . . . . . . . . . . .  298
SLC: Navigational Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  298

Содержание DG14







































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DG14

Panasonic CN-NVD905U - Strada - Navigation System Quick Reference Manual preview
CN-NVD905U - Strada - Navigation System
Бренд: Panasonic Страницы: 11
Eagle Eagle View User Manual preview
Eagle View
Бренд: Eagle Страницы: 24
Advantech PCM-3291 User Manual preview
PCM-3291
Бренд: Advantech Страницы: 13
Bushnell 360210 Quick Start Manual preview
360210
Бренд: Bushnell Страницы: 64
Parrot 3200 LS-Color User Manual preview
3200 LS-Color
Бренд: Parrot Страницы: 46
Terra TRI NAV Operation & Installation Manual preview
TRI NAV
Бренд: Terra Страницы: 26
J. W. Davis & Company BVR20 User Manual preview
BVR20
Бренд: J. W. Davis & Company Страницы: 64
Eagle IntelliMap Journey Installation And Operation Instructions Manual preview
IntelliMap Journey
Бренд: Eagle Страницы: 90
TAGMARSHAL academy 2Way Handheld Getting Started preview
2Way Handheld
Бренд: TAGMARSHAL academy Страницы: 6
Xexun GSM/GPRS/GPS WATCH TRACKER User Manual preview
GSM/GPRS/GPS WATCH TRACKER
Бренд: Xexun Страницы: 15
Navigon 8410 premium edition User Manual preview
8410 premium edition
Бренд: Navigon Страницы: 143
Maka Technologies Marbella MK-74 Deluxe User Manual preview
Marbella MK-74 Deluxe
Бренд: Maka Technologies Страницы: 61
Garmin GPSMAP 9000 Series Owner'S Manual preview
GPSMAP 9000 Series
Бренд: Garmin Страницы: 232
Raymarine Raychart 420 Quick Reference Card preview
Raychart 420
Бренд: Raymarine Страницы: 2
Garmin nuvi 2250LT Quick Start Manual preview
nuvi 2250LT
Бренд: Garmin Страницы: 12
Bushnell 363500 Quick Start Manual preview
363500
Бренд: Bushnell Страницы: 28
sparkfun GPS-18443 Hook-Up Manual preview
GPS-18443
Бренд: sparkfun Страницы: 33
Garmin GPSMAP 525s - Marine Chartplotter Declaration Of Conformity preview
GPSMAP 525s - Marine Chartplotter
Бренд: Garmin Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды