manualshive.com logo in svg

ashtech DG14, Справочное руководство

Ashtech DG14 - это передовой геодезический прибор с высокой точностью и мощными функциями. Вы можете скачать бесплатно Руководство по эксплуатации с нашего сайта для полного понимания возможностей этого прибора. Посетите manualshive.com, чтобы получить доступ к руководству.

Поделиться
Скачать
background image

Raw Data Commands

201

Raw Dat

a Commands

Enter the following command to enable the missile application condensed 
measurement record through port A every 5 seconds:

$PASHS,RAW,MCM,A,ON,5

$PASHQ,MCM,c1

This command allows you to query for raw satellite and position measurement data 
in the Missile Application Condensed Measurement (MACM) format.
c1 is the optional port designator (port A, B, or C) for the response. If a port is not 
specified, the receiver sends the response to the current port. 
If the command is set without a period, the G12 uses the period set by the 

$PASHS,RCI

 command If the 

$PASHS,RCI 

command is issued after this message 

period has been set, the period resets to the RCI setting.

MACM Message Structure

This message is not output unless positions are being computed. MCM is a 
combined message containing elements from the MBN, MCA, and PBN messages. 
The MCM message was designed for high speed data output under the limited 
bandwidth conditions common to high dynamic telemetry. Satellite PRN number, 
receive time (the time at which the data was received), doppler measurements, 
pseudo-range measurements, and full carrier phase measurements are contained 
in this message. The MCM message is variable in length, defined by the count field 
in the header. The message begins with a 4-byte sync word [4D 41 43 4D] (ASCII 
“MACM”) and ends with a checksum byte. The

 <CR><LF> 

characters that terminate 

the majority of DG16 response messages are not used in this case. In addition, the 
usual response header, $PASHR, is not used here. If the receiver is set to output 
the MCM message at regular intervals, the MACM sync word appears only the first 
time the message is output and is excluded from the messages that follow; however, 
the sync word is output each time MCM is queried. The following is the output for 
one epoch. The syntax for each parameter is listed in brackets ads [parameter 
name:number of bytes for parameter]. At the right of each line is an identifier and 
byte count.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[MACM:4] [COUNT:2] [RCVTIME:4] [NAVT: 4] 

Header: 14

[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4] Prn Data: 24
[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 
[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 
[PRN:1][WRN:1][POL:1][CN0:1]  PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 
[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 
[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 
[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 
[PRN:1][WRN:1][POL:1][CN0:1][PHASE:8][RANGE:4][DPL:4][LCK_TIME:4]  Prn Data: 24 

[CHECKSUM:1] 

Checksum: 1

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Содержание DG14







































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DG14

Acer p600 Series Quick Start Manual preview
p600 Series
Бренд: Acer Страницы: 44
Acer p600 Series Quick Manual preview
p600 Series
Бренд: Acer Страницы: 44
Acer e300 Series Quick Manual preview
e300 Series
Бренд: Acer Страницы: 2
Magellan RoadMate 147 Series User Manual preview
RoadMate 147 Series
Бренд: Magellan Страницы: 48
Garmin A02740 Quick Start Manual preview
A02740
Бренд: Garmin Страницы: 8
Nextar I4-BC - Automotive GPS Receiver Software Instruction Manual preview
I4-BC - Automotive GPS Receiver
Бренд: Nextar Страницы: 40
Magellan 300GPS User Manual preview
300GPS
Бренд: Magellan Страницы: 48
SHINE MICRO TRACKER SM150 Quick Start Manual preview
TRACKER SM150
Бренд: SHINE MICRO Страницы: 2
Navitel N500 MAGNETIC User Manual preview
N500 MAGNETIC
Бренд: Navitel Страницы: 25
Holux M-91 - Specification preview
M-91 -
Бренд: Holux Страницы: 16
Westfalia 853365 Instruction Manual preview
853365
Бренд: Westfalia Страницы: 4
Garmin eTrex Venture - Hiking GPS Receiver Specifications preview
eTrex Venture - Hiking GPS Receiver
Бренд: Garmin Страницы: 2
Globalsat LT-100 Series User Manual preview
LT-100 Series
Бренд: Globalsat Страницы: 16
Kenwood KNA-G630 Installation Manual preview
KNA-G630
Бренд: Kenwood Страницы: 24
Kenwood DNX4210DAB Instruction Manual preview
DNX4210DAB
Бренд: Kenwood Страницы: 56
Kenwood DNX210EX Installation Manual preview
DNX210EX
Бренд: Kenwood Страницы: 32
Kenwood KNA-G430 Installation Manual preview
KNA-G430
Бренд: Kenwood Страницы: 4
Kenwood KGP-2A Instruction Manual preview
KGP-2A
Бренд: Kenwood Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды