background image

Receiver Commands

181

Receiver Commands

 $PASHR,VIS

The response is in the format:

SATELLITES VISIBILITY:
GPS: FULLTIME:0690921841 TIME:18:44:01 NSV:06
 SV:   01  02 #03  04  05 #06 #07  08 #09 #10 #11 #12  13 #14 #15 #16
 EL:  *51 *27 -99 -02 -80 -99 -99 *32 -99 -99 -99 -99 *82 -99 -99 -99
 SV:  #17 #18 #19 #20 #21 #22 #23 #24 #25 #26  27  28 #29 #30 #31 #32
 EL:  -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 *58 *09 -99 -99 -99 -99
WAS: FULLTIME:0690921841 TIME:18:44:01 NSV:01
 SV:  #01 #02 #03 #04 #05 #06 #07 #08 #09 #10 #11 #12 #13 #14  15 #16
 EL:  -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 *15 -99
 SV:  #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32
 EL:  -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99 -99

where Table 6.76 outlines the parameters. 

 Table 6.76. 

$PASHR,VIS Response Format

Parameter

Description

GPS

FULLTIME

The number of seconds elapsed since the beginning of GPS 
evaluation (January 6, 1980)

TIME

The current UTC time

NSV

The number of visible GPS satellites, based on the almanac. 
Since this is based on the almanac, NSV represents a 
theoretical visibility.

SV

GPS satellite PRN number

EL

GPS satellite elevation

WAS

FULLTIME

The number of seconds elapsed since the beginning of 
SBAS evaluation (January 6, 1980)

TIME

The current UTC time

NSV

The number of visible SBAS satellites, based on the 
almanac. Since this is based on the almanac, NSV 
represents a theoretical visibility.

SV

SBAS satellite PRN number

EL

SBAS satellite elevation

Содержание DG14







































































































































































































































































































































































































Отзывы: