Ashly digiMix24 Скачать руководство пользователя страница 24

Operating Manual - digiMIX24 Digital Mixer

24

6.4 EZ-MODE

EZ-Mode offers a simplified and secure user control interface for a 

non-technical person to control the mixer with the same ease of use 

as if they were operating lighting dimmers. 

► 

TIP

All signal routing, levels, EQ, FX, DCA groups, and Aux sends 

must be configured ahead of time on the mixer before using EZ-Mode. 

► 

TIP

DCA and Aux groups must first be named on the mixer in 

order to be easily identified in EZ Mode.

To access EZ-Mode, press the System button, then press the touch

-

screen EZ-Mode button in the shortcut section. 

There are two EZ-Mode mixers types as shown below. Select the EZ-

Mode mixer you want to use, then press <Go To EZ Mixer>.

EZ-Mode Mixer #1:

 (see figure 6.3b) This mixer includes faders for DCA groups 1-4, Aux outputs 1-4, and Stereo Main output 

level with on/off switch for each fader. 

DCA groups must first be defined before using EZ-Mode

 (

sec. 2.16

)

EZ-Mode Mixer #2:

 (see figure 6.3c) This mixer includes faders for DCA groups 1-6, USB Stereo input, Tape/CD input, Aux 

outputs 1-8, and Stereo Main output level, with on/off switch for each fader. 

To use EZ mixer #2, DCA groups must first be 

defined and named, and Sub 1-4 outputs must be configured to function as Aux 5-8

 (

sec. 5.4

).

EZ-Mode Icon Menu:

 (see figure 6.3d) In either EZ mixer, an icon can be assigned 

to each fader to quickly identify its function. Press and hold the grey box above each 

fader to view and select an icon from the pop-up icon table. 

EZ-Mode Password:

 (see figure 6.3a) A password can be used in EZ-Mode to prevent 

access to the main mixer section while still allowing EZ-Mode control. The EZ-Mode 

password is always the same as the mixer's password (

sec. 5.5

). 

Additionally, the password can be used to independently lock EZ-Mode faders or 

fader icons. The <EZ-Mode Password>, <Lock Icons>, and <Lock Faders> buttons 

turn red when activated. 
EZ-Mode is also offered on the Ashly digiMIX24 app for iPad for remote mixer 

control using a local wireless network connection (

sec. 9

). If a password is to be used 

on the digiMIX24 iPad app, it must first be entered into the mixer. 

► 

TIP

Only one iPad at a time can be used to control the digiMIX24.

Figure 6.4b EZ-Mode Mixer #1

Figure 6.4c: EZ-Mode Mixer #2

Figure 6.4d: EZ-Mode Icon Menu

Figure 6.4a: EZ-Mode Main Screen

Содержание digiMix24





































Отзывы: