User Manual
Ashley-Edison International Ltd
Page 5
Precautions
The following precautions must be adhered to at all times and must be
considered in addition to any advised precautions issued at the relevant
worksite or work area.
•
Do not direct the
Model M2
Thermal Camera at very high intensity
radiation sources such as the sun, carbon dioxide lasers or arc
welders etc.
•
Always replace the lens cap when the unit is not in operation.
•
Do never point the
Model M2
Thermal Camera at high-temperature
object when switching on.
•
Wait for 10 seconds or longer to restart the camera after turning it off.
• Keep
the
Model
M2
Thermal Camera steady when operating on it.
• The
Model
M2
Thermal Camera shall work between -20
℃
and +50
℃
.
• When
the
Model M2
Thermal Camera is not in use or is to be
transported, ensure that the unit and accessories are stored in the
protective carry case.
• The
Model M2
Thermal Camera incorporates precision optical
equipment and static-sensitive electronics which should be protected
from shock and vibration at all times.
•
Do not jam the air vent on the
Model M2
Thermal Camera body.
•
Do not attempt to open the camera body, as this action will void the
warranty.
The
Model M2
Thermal Camera utilizes a Lithium Ion (Li-Ion) rechargeable
battery pack. The following safety precautions must be adhered to at all times
to ensure the safe use of this equipment.
• Do not disassemble or attempt to open the battery under any
circumstances
•
Do not expose the battery to fire or high temperatures.
•
Do not short circuit the battery.
•
Do keep the battery off moisture or water.
•
Charging of the battery should only be carried out using the
recommended or supplied charging device.