9
SINGLE DRIVE
Step 12 - 21 For Single Drive only. For Double Drive go to Step 22.
Check the angle of the nylon
bearings. Then secure the maid
uprights with screws and washers.
Do not overtighten. The maid
uprights may be twisted to remove
the bobbin. Position the drawing
pin directly beneath the drive
band adjusting knob.
Assemble the Lazy Kate.
Note - the holes with
countersunk holes on each
upright face inwards.
Thread 12 hooks into
the flyer.
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, wax the
dowel ends, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until the
end just protrudes.
Assemble the Lazy Kate.
Note - the holes with
countersunk holes on each
upright face inwards.
Thread 12 hooks into
the flyer.
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, wax the
dowel ends, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until the
end just protrudes.
Screw 12 hooks into
the flyer
Содержание TRADITIONAL SPINNING WHEEL
Страница 2: ...2...
Страница 3: ...3 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x3 x13 x2 x4 x4 x1 x2 x2 Real Scale Hardware List 3...
Страница 4: ...4...
Страница 17: ...17...
