13
Assemble the Lazy Kate.
Note - the holes with
countersunk holes on each
upright face inwards.
Thread 12 hooks into the
flyer.
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, wax the
dowel ends, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until the
end just protrudes.
Assemble the Lazy Kate.
Note - the holes with
countersunk holes on each
upright face inwards.
Thread 12 hooks into the
flyer.
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, wax the
dowel ends, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until the
end just protrudes.
Assemble the Lazy Kate.
Note - the holes with
countersunk holes on each
upright face inwards.
Thread 12 hooks into the
flyer.
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, wax the
dowel ends, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until the
end just protrudes.
Assemble the Lazy Kate.
Note - the holes with
countersunk holes on each
upright face inwards.
Thread 12 hooks into the
flyer.
Assemble the flyer unit.
Check the shape of the
nylon bearing on each
maid upright, wax the
dowel ends, then insert
into the correct hole.
Insert the drive belt
adjusting knob into the
maiden bar, turn until the
end just protrudes.
Check the angle of the
nylon bearings. Then secure
the maid uprights with
screws and washers. Do
not overtighten. The maid
uprights may be twisted
to remove the bobbin.
Position the drawing pin
directly beneath the drive
band adjusting knob.
Screw 12 hooks into
the flyer
DOUBLE DRIVE
Step 22 - 32 For Double Drive only. For Single Drive go to Step 12.
Содержание TRADITIONAL SPINNING WHEEL
Страница 2: ...2...
Страница 3: ...3 x1 x1 x2 x2 x1 x1 x1 x1 x1 x1 x3 x13 x2 x4 x4 x1 x2 x2 Real Scale Hardware List 3...
Страница 4: ...4...
Страница 17: ...17...
