Push the metal bars into one
heddle frame end, slide 2
bundles of Texsolv heddles
over the bars and push the
other end in place. Only
then remove the plastic ties.
If necessary, cut the Texsolv
heddles to separate them.
Lay each heddle frame on
a flat surface and check the
two ends are parallel.
Remove the 2 knobs threaded into
the rear of the castle. Lift the castle
and fold it flat. Be careful to hold as
directed so you don’t jam your fingers.
The groove in the side has a two stage
path - this is a safety feature so the
loom doesn’t fold too quickly.
DO NOT force the loom from position 3
into postion 4. Lift the castle carefully
up the groove before sliding back.
