Attach the castle top to
the castle sides with 8
x 38mm (1½") screws.
Check that the pilot
holes for the castle
front are all on the
same side.
Attach the bottom cross rails to the bottom of the castle sides
with 30mm (1¼") screws. Check! Only use 30mm (1¼") screws.
Longer screws may damage the sides.
Attach the castle front to the castle top and sides with 30mm (1¼") screws.
Locate the beater pins into the holes in the top of the castle front. Use these
pins to lock the beater to the loom sides when warping.
Attach 2 x rubber buffers to the castle front with 12mm (½") screws to protect
the wood when folding the castle.
30mm (1¼") screws
30mm (1¼") screws
30mm (1¼") screws
30mm
(1¼")
screws
38mm (1½") screws
38mm (1½") s
crews
