10
Tap the nylon bearing
down to the bottom of
the hole in the rear flyer
support.
Secure the front and back flyer
supports to the maiden bar
with 50mm (2”) bolt and barrel
nuts. Check the supports are
level with the edges
of the maiden bar,
then tighten.
Screw the hook and
eye into the maiden
bar.
Slide the inner shell of
the conrod universal
joint onto the front crank
until it clicks into the
groove. Apply a drop of
oil to the inner shell.
Then click the front
conrod onto the
universal joint on the
crank.
