ASHFORD – ASH-CH84 11
For assembly advice or parts go to www.warehousefurniture.co.nz or call 0800 100 858
STEP 8 -
Top
Carefully turn the unit upright.
Attach the Top to the Ends by fitting the H1 Connecting Bolts installed in the Top to the H2 15mm Cams installed in
the Ends.
Turn the Metal Cams in a clockwise direction to lock the Top to the Ends. Ensure they turn a least a ¼ to ½ a turn
STEP 9 -
BACK PANEL
Carefully turn the unit onto its Top.
Take the 2 Back Panels. The LH Panel will have a tongue on one long edge, and the RH Panel will have a groove.
Fit the tongue and the groove together.
Slide the two back panels between the grooves in the back of the cabinet Ends. These will fit into the groove in the
back of the Top.
Ensure that both Back Panels are sitting in all three grooves. Screw the Back Panel to the Back Rail as shown
below, using four H7 Panhead Screws and the predrilled holes.
H7
