Ashford ASH-CH84, Инструкция по эксплуатации

Страница: 6 / 15

ASHFORD – ASH-CH84 6
For assembly advice or parts go to www.warehousefurniture.co.nz or call 0800 100 858
INSTALL THE HARDWARE
STEP 1
- TOP

Lay the Top of the unit finished side down on a clean, clear surface.

Screw four H1 Connecting Bolts into the holes as indicated in the drawing below
H1
STEP 2
– Rails

Lay the 4 x Rails on a smooth clean surface with holes facing upwards. NOTE: All Rails are interchangeable except
for the Front Rail, which is finished on one edge. All rails including the Front Rail have the same hardware.

Insert two H2 Large Cams as shown in diagram. Ensure the arrow on the top of the Cam points towards the short
edge of the Rail.

Push an H15 Dowel into each end of each Rail.
H2 H15