Ashford ASH-CH84, Инструкция по эксплуатации

Страница: 10 / 15

ASHFORD – ASH-CH84 10
For assembly advice or parts go to www.warehousefurniture.co.nz or call 0800 100 858
STEP 6 -
RAILS

Attach the four Rails to the LH End by fitting the H2 Cams installed in the Rails to H1 Connecting Bolts installed in the
End as shown below. Ensure that the Front Rail, (one finished edge) has the finished edge facing the same way as
the finished edge of the End.
NOTE: Ensure that the rails face the same way as shown below, with the Cams on the
outside of the Rail and facing towards the top edge of the End .

Turn the Metal Cams in a clockwise direction to lock the Rails to the LH End. Ensure they turn a least a ¼ to ½ a turn.
STEP 7 –
ATTACH RH END

Attach the RH End to the Rails by fitting the H1 Connecting Bolts installed in the RH End to the H2 15mm Cams
installed in the Rails.

Turn the Metal Cams in a clockwise direction to lock the RH End to the Rails. Ensure they turn a least a ¼ to ½ a turn.