Ashford ASH-CH84, Инструкция по эксплуатации

Страница: 7 / 15

ASHFORD – ASH-CH84 7
For assembly advice or parts go to www.warehousefurniture.co.nz or call 0800 100 858
STEP 3
– LH END

Lay the LH End on a smooth clean surface with holes facing upwards.

Attach three LH Drawer Slides (CL) to the LH End using the H4 Drawer Slide Screws. Use the holes as indicated in
the diagram below - each slide requires two screws. Ensure that the end of the Slide with the wheel faces towards
the finished edge of the End.

Insert two H2 Large Cams as shown in diagram. Ensure the arrow on the top of the Cam points towards the top edge
of the End.

Push two H15 Dowels into the top edge of the End.

Screw four H1 Connecting Bolts to the End as shown below.
H1 H2 H4 H15