MISSION MEDIA CENTER
Thank you for purchasing our Mission Media Stand. Assembly of this product requires the use of a Phillips screwdriver
and hammer. We have found it helpful to have second person assist with assembly.
7400 0PKW9140106
Страница 1: ...TER Thank you for purchasing our Mission Media Stand Assembly of this product requires the use of a Phillips screwdriver and hammer We have found it helpful to have second person assist with assembly...
Страница 2: ...ht PARTS 1 Top Assembly A 2 Shelf Assembly B 2 Side Assembly C STEP 4 Identify and count hardware using diagram at right STEP 5 Align Side Assembly C with Middle Shelf and Bottom Shelf B so that the c...
Страница 3: ...shown to the right so that holes in Sides C line up with pilot holes in the skirts of Top Assembly A Fully tighten all the screws on both sides at this time STEP 8 Finally tap Wooden Plugs into holes...
Страница 4: ...Dust as needed with a soft cloth Clean with damp cloth and mild solution of dish soap Polish with soft cloth and polish that contains no pigments or silicone www llbean com Product Support 1 800 341...
