background image

CZ

2

General safety information

This user manual contain basic information that should be observed during assembly, start-up, 
operation, and maintenance. Therefore, this user manual must be read by installers and operators 
prior to assembly and start/up, and must be accessible to every user of this unit. Additionally, 
all further safety information in this document absolutely must be observed. Read and follow all 
instructions. In order to minimize the danger of injury, do not allow children to use this product. 
Hazards from non-compliance with safety information. Non-compliance with safety information 
can result in hazards to persons, the environment, and the equipment. Non-compliance with safety 
information will result in a forfeit of any potential right to damage compensation.  

Insuffi cient personnel qualifi cation

Hazards in the event of insuffi  ciently qualifi ed personnel, potential consequence: Injury, heavy material 
damage.

•  The system operator must ensure compliance with the required qualifi cation level.
•  Any and all work may only be performed by correspondingly qualifi ed personnel.
•  Access to the system must be prevented for insuffi  ciently qualifi ed persons, e.g. via access codes 

and passwords.

Potential overdosing of chemical agents

Despite PP60 pH® comprehensive safety functions, it is possible that a probe failure and other errors 
could lead to an overdosing of chemical agents. Potential consequence: Injury, heavy material damage.

•  Design your installation such that uncontrolled dosage is not possible in the event of a probe failure 

or other errors, and/or such that uncontrolled dosage is recognized and halted before damage is 
incurred. 

•  Uncontrolled overdose of chemicals can cause harm to health and property. Even though the device 

contains a number of security elements can not be ruled out that in case of failure of the measuring 
probes, or the whole device may result in overdose of chemical agents. Install the equipment so 
that uncontrolled overdose of chemicals was not possible and that uncontrolled overdose has been 
detected in time before causing any harm. It is necessary to use chemicals in such quantities that an 
overdose will not cause dangerous concentration of chemical agents. Do not use chemicals in too 
large packages or with too high concentration.

Gaseous chlorine produced from dosing in standing water if dosing 

outputs are not closed via the fi lter pump

If the fl ow switch is stuck or experiences another error, there is a risk of dosing into standing water. 
Poisonous chlorine gas can be yielded when sodium hypochlorite and pH minus come together.

Non compliance with informational text

There is a great deal of informational text indicating hazards and their avoidance. Not observing informational 
text may lead to hazards. Potential consequence: gravest degree of injury, heavy material damage.

•  Read all informational text carefully.
•  Cancel the process if you are unable to exclude all potential hazards.

Содержание 13260

















Отзывы: