Asco JOUCOMATIC PULSTRONIC 605 Series, Руководство по установке

Страница: 3 / 23

F: PNEUMATIC CONNECTION
(tapped port 1 - 2 (3))
0 = tapped G (ISO 228/1),
exhaust (3) protected, non connectable
3 = tapped G (ISO 228/1),
with collectable exhaust (3) (
* *
)
4 = tapped NPT, exhaust (3) protected, non connectable
(
* *
)
5 = tapped NPT, with collectable exhaust (3) (
* *
)
(
* *
)Selectable for DN4, 7, 12 only.
For DN0.5 : F=0
3-PORT PROPORTIONAL VALVE
WITH CONTROL LOOP
PULSTRONIC
Series 605
GENERAL
The PULSTRONIC is a compact
electropneumatic pressure regulator
(E/P transducer)
which converts an electrical signal into a pneumatic pressure. It is particularly suited for precise
pressure regulation due to its integrated control loop with electronic pressure feedback.
CONSTRUCTION
Body: aluminium and synthetic material
Internal parts: stainless steel and synthetic material
Sealings: nitrile (NBR), FPM
SPECIFICATIONS
FLUID :air or neutral gases, filtered at 50 µm, lubricated or not
C O N N E C T I O N :instant fittings for flexible hose O.D. 4 mm
G 1/8, G 1/4, G 1/2
OPERATING PRESSURE :see "pressure range"
T E M P E R A T U R E - FLUID :0 °C to 60 °C
- AMBIENT :0 °C to 50 °C
ANALOG SETPOINT :0 - 10 V, 0 - 20 mA, 4 - 20 mA
FAILSAFE FUNCTION :pressure held at power failure, without control
HYSTERESIS :< 1 % of maximum output pressure (PMR)
REPEATABILITY :0.5 % of maximum output pressure (PMR)
Max. consumption
(W)
ELECTRICAL CHARACTERISTICS
Spade plug size 15 connector, DIN 43650,
9,4 mm, industry standard B, rotatable by 90°
(delivered with solenoid valve)
Voltage
(residual ripple: max.10 %)
Protection
degree
Electrical connection
Max. current
(mA)
3.6
Insulation
class
24 V=
+/-10%
150
F
IP 65
CHOICE OF EQUIPMENT
Ø
Ports
Ø Nominal diameter
(mm)
Flow at 6 bar
(l/min - ANR)
7
550
1250
4000
0.5
4
7
12
Instant fitting O.D. 4 mm
G 1/8
G 1/4
G 1/2
ACCESSORIES
• Fastening clips for adaptation on symmetrical rails to DIN/EN 50022, set of 10 clips - cat. no:
33400036
(only for DN 0.5 version)
• Spade plug, 4 to 6 diameter cable, size 15 connector, DIN 43650, 9,4 mm, industry standard B - IP65, with 4 pins - cat. no.:
88100240
A: CONSTRUCTION (connection), body
1 = DN 12
, 1/2, indirectly operated
5 = DN 0.5
, instant fitting for flexible hose O.D. 4, directly operated
7 = DN 4
, 1/8, indirectly operated
9 = DN 7
, 1/4, indirectly operated
P: PRESSURE RANGE
Relative pressure: Min.-max. input pressure:
1 = 0 - 1 bar (only on DN 0.5)
1.5 - 2 bar
2 = 0 - 2 bar
2.5 - 5 bar
3 = 0 - 3 bar
3.5 - 5 bar
6 = 0 - 6 bar
6.5 - 8 bar
0 = 0 - 10 bar
10.5 - 12 bar
O: OPTION
(
*
)
0 - without option
1 = Feedback output 0 ... 10 Volt
2 = PNP pressure switch, ± 5 %
(
*
)Only one option possible.
Special designs (consult us).
S: SETPOINT
0 = 0 ... 10 Volt
1 = 0 ... 20 mA
2 = 4 ... 20 mA
CODIFICATION 6 0 5 A S O F P
Versions in bold letters are standard versions.
Pulstronic DN 0.5 Pulstronic DN4...DN12
1
3
2
X
W
1
3
2
X
W
3
GB