AS3424S Hardware Installation Guide
Solutions Provider for FTTx, RFoG, and HFC
www.ascentcomtec.com
Page 20 of 22
If the indicator flickers, there is data transmission.
1 to
24(LINK/ACT)
SFP+ port
indicator
If the indicator is always on, the system is normally linked.
If the indicator is off, the port is not linked.
If the indicator flickers, there is data transmission.
1 to 2
QSFP+ port
indicator
1. work in the mode of 100GE
If the indicator is always on, the system is normally linked.
If the indicator is off, the port is not linked.
If the indicator flickers, there is data transmission.
2
．
The 40GE port breaks out into 4 10GE ports
The 4 port indicators are on in turn. The interval between two indicators is
5 seconds. The indicators combing with BREAKOUT indicators show the
state of 10GE ports.
MODEL:10G
(CG0/1 to 0/4)
The 40GE port
breaks out into
4 10GE ports
1. In the mode of 40GE mode, the BREAKOUT indicator is off.
2. The 40GE port breaks out into 4 10GE ports and combines with QSFP+
port indicator
3. The QSFP+ port indicator shows the status of the 4 40GE BREAKOUT
indicators
Figure 5-1 SFP+ port indicator
Figure 5-2 40GE BREAKOUT indicator
