ASAHI PENTAX S3, Руководство по обслуживанию

Страница: 32 / 54

L-l Where To Apply. Quantity of Oil
(Number indicates droplets of watch oiler)
Between (E31) (1st curtain pinion shaft) and shaft bearing of (C01) (top
mec. plate).
1
Between ( E31) (1st curtain pinion shaft) and shaft bearing of (C02)
(bottom mec. plate)
1
Between (E32) (2nd curtain pinion shaft) and shaft bearing of (C 01) (top
mec. plate).
1
Between (E32) (2nd curtain pinion shaft) and shaft bearing of (C02)
(bottom mec. plate).
1
Between (E18) (coupler gear) hole and (E53) (Coupler gear retainer
screw).
2
Between (E26) (selector gear shaft) and (E14) (bottom selector gear) hole. 1
Between (E26) (selector gear shaft) and (E15) (top selector gear) hole. 1
Between (E34) (curtain roller, small) and shaft bearing of (E01) (top shaft
plate).
1
Between (E34) (curtain roller, small) and bearing of (E89) (2nd curtain
shaft plate).
1
Between (E85) (high speed cam) hole, (E69) (cam shaft) and (E76) (cam
shaft nut).
1
Between (E104) (sync. gear) hole and (E105) (sync. gear column). 2
Between (F12) (slow speed rod) and (F13) (slow speed rod receptacle)
hole.
1
L-2
Between (D05) (rewind shaft) and (D04) (shaft
bearing).
Apply oil on a piece of glass or on a clean piece
of tiny iron stick and give one vertical stroke with the
side of it on (D05) and then put it into (D04).
L 3
(0G00) Spots marked " A," "C ," and "D" in the following sketch (both top
and bottom). 1 or less
NOTE: When the governor has been disassembled, the spot marked "B" should not be
oiled with watch oiler. Apply oil to the pivot only, and then, wipe it away lightly.
L-4
Between (E31) (1st curtain pinion shaft) and (E37) (curtain roller
bearing), top and bottom.
2
NOTE: If (E37) is plastic, no oiling is required.
230-2 -32
-