Asada ECOcycle Aurora II, Инструкция по эксплуатации

Страница: 17 / 28

16
ECOcycle Aurora Ⅱ
Oil discharge operate when turn on the oil tank full lump（①～⑧）or fi nish daily operation（⑤～⑧）.
① [CLOSE] the ball valve of suction hose.
② Starting machine during push the tank full
bypass switch on the lower right of handle in
the back panel under turn to automatically stop
of power switch.
＊ Keep pushing the switch, the switch will get
back if stop pushing.
③ This machine will be automatically stop when
the suction pressure reach－0.03MPa（－4.4psi）.
④ Switch [OFF] the machine.
⑤ Adjust pressure in order to suction side pressure
gauge become 0.1MPa（14.5psi）－ 0.2 MPa（29psi）
during open the ball valve of suction hose.
⑥ [REMOVE] the cap of oil discharge port on the
back of machine.
⑦ Slowly open the valve and discharge oil to
other container.
＊ The oil is collecting about 2L when the tank is
full.
⑧ [CLOSE] the valve after discharge oil.
[CLOSE] the cap of oil discharge port after
fi nish discharge of oil.
Checking each 100 hours operation or per month operation if the oil or contamination is
accumulating in the electrostatic fi lter.
Discharge Oil Method (Oil separator)
Discharge Oil Method (Electrostatic fi lter)
OIL SEPARATOR
OIL DISCHAGE PORT
TANK FULL
BYPASS SWITCH
ELECTROSTATIC FILTER
OIL DISCHARGE PORT
HOW TO USE
① Adjust pressure in order to suction side
pressure gauge become 0.1 － 0.2 MPa during
open the ball valve of suction hose.
② [REMOVE] cap of oil discharge port.
③ Slowly open the valve and discharge oil to
other container.
④ [CLOSE] the valve after discharge oil.
[CLOSE] the cap of oil discharge port after
fi nish discharge of oil.