BEAVER 10
3
-Before plugging the machine in, always make sure that the switch is OFF. If the
machine remains plugged in, it will start suddenly, leading to unexpected accident
or injury.
-During operation, keep your hands and face away from the moving parts. You may
be caught in the moving parts, causing injury.
-Do not use gloves for works such as cutting. You may be caught in the moving
parts, causing injury.
-Do not wear neckties, open-sleeved clothing, knitted gloves, loose clothing or
jewelry (such as necklaces). Otherwise, you may get caught in moving parts.
-Wear caps or protective hair covering to contain long hair. Otherwise, you may get
caught in moving parts.
-When not in use or when servicing, cleaning, checking or replacing parts, switch
off and unplug the machine. If the machine remains plugged in, it will start suddenly,
leading to accident or injury.
-Do not leave the machine unattended during rotating. Others may get caught in
moving parts.
-It is mandatory to use Pipe Support for long and heavy work to avoid shaking and
distortion of the work during turning and tilting of the machine by the weight of the
workpiece. Otherwise, the workpiece and the machine become unstable.
-Wear safety glasses while operating the machine. Chips enter your eyes and nose.
-Do not blow off chips using compressed air. They may get into your eyes and loss
of eyesight may result.
-Use a face or dust mask if operation creates dust. Sawdust and dirt may enter your
eyes and nose.
-Immediately after cutting, fragment are hot. Do not touch them directly with hands.
-When lifting the machine, bend your knees to avoid a load on your waist.
-The machine with chip is slippery. Do not drop the machine on your feet while
lifting it.
-Do not install the machine inclined or on an unstable place. The machine fall down,
causing injury.
