BEAVER 10
2
OPERATING INSTRUCTIONS
-Always ground the machine to avoid electric shock or resultant death.
-Do not touch the plug with wet hands.
-Do not expose the machine to rain and water and do not use it in damp or wet
locations. Humidity will deteriorate motor insulation or lead to electric shock.
-Immediately replace Power Plug, Power Cord or extension cord, if damaged.
-Do not hold the Power Cord and pull it to disconnect from the receptacle and do
not put the machine on the cord and damage it.
-An extension cord used should be a three-core cabtyre cable having an earth wire.
Use a thick and durable cord for outdoor use.
-Always use the machine at the voltage indicated on Machine Plate.
Otherwise, the machine may become hot, emit smoke or catch fire.
-At cutting do not force the machine in a manner that the motor stops due to an
overload switch.
-Immediately replace the Power Plug, Power Cord and extension cord, if damaged.
-If the machine has emitted smoke or took fire, do not disassemble it but have it
inspected or repaired by a qualified person.
-Never install an earth wire to the gas pipe. If attempted, explosion may take place.
-Do not use the machine in the presence of flammable liquids or gases such as
gasoline and thinner. Otherwise, ignition or explosion may take place.
-The machine and other parts coast for a while after the switch is turned off.
Never touch them while they are moving.
-Cut surfaces are very sharp and do not touch them with your hands.
-When it is required to touch the saw blade and moving parts for replacement, etc.,
switch off the machine and unplug it before starting that operation.
罫線消え対策
