22
| Installation
Aruba S1500 Series Mobility Access Switch
| Installation Guide
Screws for system rack mount (4x): M6 x 15 mm Phillips Pan Head Screws
Suitable Screwdrivers for all screw types provided in the box (not included in the kit)
Installation Steps
To install an S1500 Mobility Access Switch from the middle into a two-point 19-inch rack system:
1. Place a rack mount bracket over the mounting holes on either side of the Mobility Access Switch (see
Figure 15
for the S1500-12P model and
Figure 16
for the S1500-24P or S1500-48P model).
2. Secure the bracket to the Mobility Access Switch using the eight screws for rack mount bracket (four
per bracket) and a suitable screwdriver.
Figure 15
Mid-Mount Brackets (S1500-12P)
Figure 16
Mid-Mount Brackets (S1500-24P or S1500-48P)
3. Mount the Mobility Access Switch within your organization’s rack system using the four screws for
system rack mount (two per bracket) and suitable screwdriver (see
Figure 17
for the S1500-12P model
and
Figure 18
for the S1500-24P or S1500-48P model).
Some racks require screws that differ from those included with the S1500 Mobility Access Switch. Ensure that you
have the correct screws before installing the S1500 Mobility Access Switch.
