Aruba S1500 Series Mobility Access Switch
| Installation Guide
Installation |
19
Screws for rack mount bracket (x8):
S1500-12P— M3 x 6.5 mm Phillips Flat Head Screws (included in the kit)
S1500-24P or S1500-48P— M4 x 8 mm Phillips Flat Head Screws (included in the kit)
Screws for system rack mount (4x): M6 x 15 mm Phillips Pan Head Screws (included in the kit)
Suitable Screwdrivers for all screw types provided in the box (not included in the kit)
Installation Steps
To install an S1500 Mobility Access Switch from the front, into a two-post 19-inch Telco rack:
1. Place a rack mount bracket over the mounting holes on either side of the Mobility Access Switch (see
Figure 10
for the S1500-12P model and
Figure 11
for the S1500-24P or S1500-48P model).
2. Secure the bracket to the Mobility Access Switch using the eight screws for rack mount bracket (four
per bracket) and a suitable screwdriver.
Figure 10
Rack Mount Brackets (S1500-12P)
Figure 11
Rack Mount Brackets (S1500-24P or S1500-48P)
Some racks require screws that differ from those included with the S1500 Mobility Access Switch. Ensure that you
have the correct screws before installing the S1500 Mobility Access Switch.
