Aruba AP-505H Access Points
Startup Guide
The Aruba AP-505H Access Points are high-performance, multi-radio
wireless devices that can be deployed in either controller-based (AOS)
or controller-less (Instant) modes in hospitality and branch or
teleworker deployments. The Aruba AP-505H Access Points support
the full 802.11ax (Wi-FI 6) featureset with dual 2x2 MIMO radios,
deliver locationing functions, and can serve as a flexible IOT gateway,
delivered through the built-in BLE and 802.15.4 radio. Additional
features include:
Four ethernet ports for local wired access (E1-E4)
Ability to supply up to 30W of POE power to attached devices on
E1 and/or E2
Flexible USB host interface with 5W power sourcing capability
IPSec crypto performance of 500Mbps
Intelligent Power Monitoring (IPM) feature
Package Contents
The following materials are included with this product:
Aruba AP-505H Access Point
Inform your supplier if there are any incorrect, missing, or damaged
parts. To return this product, repack this unit and other included
materials into the original packaging before returning it to the
supplier.
Installation
This device must be professionally installed and serviced by a trained
Aruba-Certified Mobility Professional (ACMP), or similar Aruba-
certified technician.
To install this device, refer to the
Aruba AP-505H Access Points
Installation Guide
by scanning the QR code in this section, or visiting
the
Documentation
tab on
support.arubanetworks.com
,
then
select
Hardware Installation Guides > Access Points > AP-505H
Software
For instructions on initial setup and software configuration, refer to
the latest version of the AP Software Quick Start Guide by scanning the
QR code in this section, or visiting the
Documentation
tab on
support.arubanetworks.com
,
then select the
Software User & Reference Guides > Aruba Unified
.
Software End User License Agreement
The End User License Agreement (EULA) information for this product
can be found at
www.arubanetworks.com/assets/legal/EULA.pdf
.
Regulatory Compliance
An upgrade to the AP firmware and/or downloadable regulatory table
(DRT) file to the latest available version is recommended. This ensures
that the AP supports the most up-to-date set of countries and
regulatory specifications.
Aruba access points are classified as radio transmission devices, and
are subject to government regulations of the host country.
The network administrator(s) is/are responsible for ensuring that this
device operates in accordance with all local/regional laws of the host
domain. Access points must use channel assignments appropriate to
the domain in which the access point is deployed.
For a complete list of approved devices for by your country domain,
refer to the
Aruba Downloadable Regulatory Table Release Note
by
scanning the QR code in this section, or visiting
http://www.arubanetworks.com/techdocs/DRT/Default.htm
.
The regulatory model number (RMN) for AP 505H is:
AP-505H RMN: APINH505
Changes or modifications to this unit not expressly approved by Aruba
Networks, a Hewlett Packard Enterprise Company could void the
user’s authority to operate this equipment.
Brazil
Este equipamento não tem direito à proteção contra interferência
prejudicial e não pode causar interferência em sistemas devidamente
autorizados.
Canada
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference; and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
Operation in 5150-5250MHz is restricted to indoor use only.
Déclaration d’Industrie Canada
Ce périphérique est conforme aux règlements RSS exempts de licence
d’Industrie Canada. L’utilisation de ce périphérique est soumise aux
deux conditions suivantes : (1) ce périphérique ne doit pas provoquer
d’interférences, et (2) ce périphérique doit accepter toute
interférence, y compris les interférences susceptibles de provoquer
un dysfonctionnement.
L'utilisation à 5150-5250 MHz est limitée à une utilisation en intérieur.
European Union
The Declaration of Conformity made under RED 2014/53/EU is
available for viewing at:
www.hpe.com/eu/certificates
. Select the
document that corresponds to your device’s model number as it is
indicated on the product label.
Wireless Channel Restrictions
5150-5350MHz band is limited to indoor only in the following
countries; Austria (AT), Belgium (BE), Bulgaria (BG), Croatia (HR),
Cyprus (CY), Czech Republic (CZ), Denmark (DK), Estonia (EE), Finland
(FI), France (FR), Germany (DE), Greece (GR), Hungary (HU), Iceland (IS),
Ireland (IE), Italy (IT), Latvia (LV), Liechtenstein (LI), Lithuania (LT),
Luxembourg (LU), Malta (MT), Netherlands (NL), Norway (NO), Poland
(PL), Portugal (PT), Romania (RO), Slovakia (SK), Slovenia (SL), Spain
(ES), Sweden (SE), Switzerland (CH), Turkey (TR), United Kingdom (UK).
Radio
Frequency Range
MHz (Wi-Fi)
Max EIRP
BLE/Zigbee
2402-2480
9 dBm
Wi-Fi
2412-2472
20 dBm
5150-5250
23 dBm
5250-5350
23 dBm
5470-5725
30 dBm
5725-5850
14 dBm
