Aruba AP-505H, Руководство по установке

Страница: 3 / 15

Aruba AP-505H Access Points
| Installation Guide
3
Figure 2
AP-505H access point (rear view)
Bluetooth Low Energy Radios
Aruba AP-505H Access Points are equipped with an integrated BLE and Zigbee radio that provide the following
capabilities:

location and asset-tracking applications

wireless console access

IoT gateway applications
Console Port
The 5-pin Micro-B connector is located on the back of this device. Use the proprietary AP-CBL-SERU cable for
direct management of this device when connected to a laptop or serial console (a standard USB cable cannot be
used for this interface). For pin-out details, refer to Figure 3 .
Figure 3
Micro-B Port Pin-out
Ethernet Ports
The Aruba AP-505H access points are equipped with one active Ethernet ports (Eth0), shown in Figure 2 . The port
is 100/1000/2500/5000 Base-T, auto-sensing MDI/MDX, which supports uplink connectivity when linked by an
Ethernet cable. Refer to Figure 4 for a detailed port pin-out.
1: NC
2: RXD
3: TXD
4: GND
5: GND