Aruba 800-E, Руководство по установке

Страница: 17 / 52

Aruba 800-E 9
Installation Guide
Installing the Chassis
Chapter 2
Orient both brackets so that the narrow flange faces the front. When placed
properly, the brackets’ screw holes will match the holes on the side of the
chassis.
Use a Phillips or cross-head screwdriver to attach each bracket securely with
three 6-32 flat head screws (included).
3. Attach the 800-E Access Multiplexer to the rack.
N
OTE
: For proper operation, the 800-E Access Multiplexer requires an ambient
air temperature between 0 to 40 ºC (32 to 104 ºF). Make sure your rack
environment is in compliance.
C
AUTION
: To avoid personal injury or damage to equipment, get help
for lifting and positioning the 800-E Access Multiplexer.
Also, do not install the 800-E Access Multiplexer in any
fashion where instability or uneven mechanical loading
may occur.