To remove the transceivers that have the wire bail, lower the bail until it is approximately horizontal. Using the bail,
pull the transceiver from the slot.
Connect the switch to a power source
Procedure
1.
Depending on your switch model, do one of the following:
a.
For the Aruba 2930F 24-port and 48-port switches, plug the included power cord into the switch’s power
connector and into a nearby AC power source.
Figure 18: Connecting the power cord on 2930F 24-port and 48-port switches
b.
For the Aruba 2930F 8G PoE+ 2SFP+ Switch, plug the AC/DC adapter’s power cord into the switch, and
then plug the AC/DC power adapter into a nearby AC power source.
36
Aruba 2930F Switch Series Installation and Getting Started
Guide
