Aruba Networks AirMesh MST200, Руководство по установке

Страница: 5 / 18

MST200 Installation Guide
4
Solar Irradiation and High Temperature Protection
Pay attention to level of sunlight, which can increase the working temperature of MST200 to
higher than specifications allow.
A solar shield is provided in the Aruba standard package and should be installed to protect any
outdoor MST200. The Aruba Warrantee policy does not cover those outdoor products for which
Solar shields are not installed. Please contact Aruba technical support engineers for detailed
information.
RF Device Protection
Before powering up the MST200, the RF port must be connected to an antenna or a valid
load (not included in the standard accessories for MST200). Otherwise, the RF module may be
burned out. Aruba will not take any responsibility for such damage. For RF module with power less
than 100mW, in test environment, it is allowed worked without load but should be within 30 minutes.
Protection on unused RF module
The unused RF interface must be closed via configuration command and its protective cap must be
wrapped up by waterproof PVC tape to prevent from falling off. Otherwise, the RF module may be
damaged. Aruba will not take any responsibility for such damage.
FCC Certificate
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
REMINDER
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.