Aruba Networks AirMesh MST200, Руководство по установке

Страница: 15 / 18

MST200 Installation Guide
14
Figure 3-5 Mounting MST200 on a pole
3.2 Grounding the MST200
The grounding must be completed before powering up the MST200.The residence of grounding wire
should be less than 5 ohm and the grounding cable’s cross-section area should be no less than 6
mm
2
.The grounding hole is at the left side of the MST200.
Figure 3-6 Grounding the MST200
Step 1 Peel the cover of one end of the grounding cable (green or yellow and green grounding cable with 6
mm
2
cross-section area) and place the bare grounding cable into the copper lug, and press firmly