19
GENERAL INSTRUCTIONS
TROUBLESHOOTING
•
This device is not designed to be used by
persons (including children) who have any kind of
disability whether it is physical, sensatory or
mental nor is it to be used by persons who do
not have enough experience or knowledge. It
may only be used by such persons when there is
a second person present responsible for their
safety or the second person has given them
instructions in the correct usage of the device.
•
The owner of the device is required to pass these
operation instructions on to the succeeding
owner and to provide the succeeding owner with
the details of the sanitary installation professional
who installed the device.
•
There are no scheduled maintenance intervals.
•
This product is exclusively suitable for installation
indoors, for general personal hygiene.
Special notes for TWINLINE AIR and LED
colored lighting (optional):
•
Do not use any bath additives containing oil in
your TWINLINE 2 AIR tub. Do not use any
products which form an oily film or which contain
extracts or which oxidize easily. Additives
containing oils cling to the inside of the pipes and
restrict the flow of air.
•
Keep the systems free of dust and dirt. Sediments
can pollute the bath water.
•
Do not look directly into the ray of light from the
operational LED colored lighting lamp from the
front. This may cause damage to your eyes.
•
Do not use the tub with water hotter than 60° C.
Water which is hotter than 60°C can damage the
system.
•
Press the control key on the residual current
operated circuit breaker once a month! In this
way you can check if the circuit breaker is in
working condition. However this does not check
the protective measure itself.
•
Have the system checked annually by a
registered sanitary installation professional. For
this purpose fill the bathtub, remove the skirt, and
let the system run for approximately 10 minutes.
Check all connections that they are tight and
watertight.
•
Liquid disinfection:
You should disinfect your TWINLINE AIR at least
once a month with a liquid disinfectant! Put some
Artweger "Desinfektionsmittel Flüssig" ("Liquid disin-
fectant") in the bathwater after you have finished
bathing! Use only Artweger "Desinfektionsmittel
Flüssig" ("Liquid disinfectant") for whirlpool tubs
which gently disinfects the tub material and the
integrated technology. Please adhere to the instruc-
tions for use and the amounts given on the
packaging!
Air system doesn't work
LED blinks only every 8 seconds: water level in the tub is
too low (at least 2cm). LED doesn't blink at all: Check the
main switch, the fuse and the power connection.
Air system turns itself off
The cycle time of 20 minutes is over or the water level
in the tub is too low (at least 2cm).
Colored lighting does not work
Check the main switch, the fuse and the power connection.
Jet blow out does not work
The automatic jet blow dry only starts 20 minutes after
the end of the shower or when the tub is completely
empty after a bath.
DIN EN 62471, 2008
when within 40 cm
LED risk category 1
EN